High Bonding Hot Melt Zinc Oxide Adhesive Gum For Surgical Dressing Medical Plaster

High Peel Strength Zinc Oxide Hot Melt PSA Glue For Medical Tape Plaster Wound Dressing

SUGGESTED USES

Medical tapes, plasters and bandages to various substrates, wound dressing.
Other pressure sensitive adhesive applications that high bond strength and tack, high shear are required.

TYPICAL PROPERTIES

OPERATING GUIDES

The material can be applied by slot or roll coating applicators. Suggested operation temperature is 150 – 180 0 C
for both, depending on machines, substrates, and plant conditions.

FDA STATUS

The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.

PACKAGE

6.25kg or 1.045kg block wrapped with siliconized release paper, 25kg/box.
Please consult the sales representative for special requirements.

STORAGE & SHELF LIFE

The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature below 35 0 C and above 5 0 C.
Direct sunlight and moisture condensation must be prevented.

OPERATING PRECAUTIONS

Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal
protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is
suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.

Our Certificate

High Tack Zinc Oxide Adhesive

Wound Dressing Zinc Oxide Adhesive

Surgical Dressing Zinc Oxide Adhesive

High Bonding Hot Melt Zinc Oxide Adhesive Gum For Surgical Dressing Medical Plaster Images